Често задавани въпроси
Is there detergent residue on the textile after washing? Tensides interfere with the beading effect -> swivel out with clean water.
Detergent residue probably prevented the adhesion of the textile coating on the thread. -> Rinse the washed textiles with clear water before coating.
Permanence: UV stability, washing machine and detergent resistance, breathability.
Yes! – This concentrate can be mixed with demineralized water – Done!
A coating for textiles protects against moist contaminants. It also prevents the penetration of dirt into the threads and guarantees the easy dissolving of dirt particles.
The guaranteed storability is 6 months; however, based on our experience, we report that no product changes occur even after 1-2 years.
nanoblo® nanocoatings must be storred in a well ventilated area away from sources of ignition and temperature between +3 έως 30 oC.
Some products are ethanol-based and thus hazard materials (UN 1993), packaging group 2 All areas of filling must thus be explosion-protected. No smoking, be careful with fire and open flames.
Close bundle as quickly as possible after filling.
The main nanoblo® products are not harmful to health. Nonetheless, we recommend wearing gloves when handling chemicals.
Yes! We recommend an application using a conventional polishing machine!
SiO2 (silicon dioxide) – the primary ingredient of glass.
No, they are safe for food and environmentally friendly. SiO2 is an inert substance that surrounds us in nature. It is thus a "basic element" in nature.
The contained functional group leads to the formation of an extremely low surface energy on the substrate surface. These layers are characterized by very good hydro- and oleophobic finishes and anti-stick effects.
The SiO2 layer on the substrate surface is so thin (100 nanometers) that elasticity is guaranteed without changing the look, feel or other properties of the textile.
A sealing always means an airtight coating of the substrate. But SiO2 coatings are breathable.
No! Unfortunately, manufacturers of low-quality and outdated technologies are also trying to ride the "Nano" wave. Nano is only a unit of measurement. Layer thicknesses below 100-200 nm are normally referred to as nano technology.
Caution: There are many companies that write "Nano" on their products that have nothing to do with SiO2 or TiO2!
The portion of active components in the formulation. These are responsible for the beading behavior and for abrasion resistance on certain surfaces.
No! In their hardened state, nanoblo® coatings are even safe in food. The water-based systems can be applied anywhere without concern. For solvent-based systems, we recommend an exhaust hood for spray applications.
Yes! No hazardous substances are created during production. Nano products also create enormous cost savings in the field of cleaning and the use of chemical cleaners.
Water-based products should not be used below 2 oC. It should not be raining during application.
Storage-stable: after seconds.
Water-stable: after complete drying of the solvent in the product
Abrasion and chemical stable: after 24 hours
We recommend a drying time of 24 hours for all tests. The drying time can be accelerated by heat (150 oC).
Financed from 100% capital resources (family company).
Not dependent on stock exchange or banks.
With the "distributor/supplier" business model, nanoblo® usually waives direct sales to industry or end customers = enormous cost savings in the field of marketing = best quality at the lowest price - Personal consulting atmosphere - Continuous further development of existing systems - Regular new developments.